Wireless surveillance equipment is substantially less difficult to set up than its wired counterparts. All you want is a strong Wi-Fi connection to replace messy wires, drilled walls and hours (even days) of hard work. The problem with a wireless security system, though, is that it is vulnerable to network slowdowns that make it more difficult - occasionally even not possible - to get a bright real-time video feed of what is going on.
So without additional ado, here are a few leading tips to aid enhance the speed and reliability of your wireless security system:
1. Decrease the obstructions among the DVR and the camera One particular of the most obvious factors that halt wireless surveillance equipment is physical obstructions. Your wireless surveillance equipment system ought to ideally have a clear line of sight to the wireless receivers. This may possibly not be achievable for all networks though, especially for ones with cameras spread out across different places. Do notice that materials like plaster and wood do not block wireless signals as completely as bricks, concrete or metal. If you have an option among putting a wireless camera or a Wi-Fi router behind a wooden wall or a concrete wall, decide on the former to reduce the obstructing effect on wireless signals.
2. Match your video settings to match the obtainable bandwidth. A wireless security camera can also slow down its video feed if the Wi-Fi connection does not have the bandwidth to deal with the load at first. Just put, you mustn't constantly select the best quality video settings just because your surveillance equipment can do so. High video capture resolutions, higher frame rates and several cams on a security system can put significant strains on the bandwidth capacities of a router. Over stressing the network could cause faulty video feeds that are distorted or even cut off. This is especially correct when your wireless surveillance equipment upload their captured info to the Internet. If a Wi-Fi router has enough difficulties coping with different high-res video feeds on a regional connection, then you can bet that it'll have even a lot more difficulties coping with a feed that it has to stream over the Internet.
3. Choose a low-traffic wireless channel. Other wireless products like phones, tablets and smart TVs can conflict with the connections of your wireless surveillance system. This approach sounds technical at first glance but there are thankfully applications out there that can simplify the procedure for you.
Firstly you'll require network analyzer software like inSSIDer. Download this system or an equivalent program and install it on your personal computer. Run the program and select the alternative where it will scan 2.4 GHz channels. You ought to come up with a graph displaying you which channel has the highest signal strength, ergo the one that is least choked by other wireless products. Take note of this channel as you open up the control panel window of the router connected to your wireless surveillance network. Log in and select the channel you noted earlier to fulfill the process.
Keep all these in mind and your wireless surveillance equipment will run smoother and come across fewer troubles in the long term!
No comments:
Post a Comment