Having a campfire in the backyard is something most families will truly enjoy especially for kids. To have your own fire pit is a very convenient way to relax
Having a campfire in the backyard is something most families will truly enjoy especially for kids. To have your own fire pit is a very convenient way to relax, enjoy the heat and hang out with friends. A fire pit can be built without any expensive materials you can easily do it yourself.
Fire Safety Practices:
1. Open fires are prohibited in some local codes that’s why it is necessary to check such restrictions before building a fire pit. Safety and building inspection is required in some areas.
2. Choose a spot away from trees, overhanging branches, tree roots in the ground, dry grasses, shrubs, or anything that can easily catch fire. If you don’t have a choice but to build in dry grasses, make sure that you build the fire pit walls higher.
3. Dried leaves, wood sticks, pine needles and other flammable debris should be cleared away for at least 10 feet around the fire pit. Use a mesh screen lid to prevent flying sparks from starting fire. Another option is to pre-water the surrounding area.
4. Bucket or bottle of water should always come in handy.
The Basics of Fire Pit Building :
1. The size of the pit is determined based on your intended use. If it is for keeping warm and creating light, a diameter of 2 feet is usually enough for one to three people and three to four feet for larger groups. If it is for cooking, it will depend on the food. The recommended 2-4 feet diameter is often sufficient for barbeques, direct grilling, and Dutch oven cooking. You might consider making two pits for indirect grilling especially whole stuff like for roasting whole pig.
2. Drive a stake in the ground at the pit center. You need to attach a string (1 foot) to the stake at one end and the other end to a large nail.
3. Make a circle for the pit with the nail and dig 1 foot deep. At the center of this large hole, make a smaller hole by digging 1 foot deeper with 6-8 inch diameter. This smaller hole is intended for drainage.
4. Both holes must be filled with gravel until the larger hole has gravels in it about 4 inches deep.
5. Add three inches of sand or soil that would now contain the fire.
6. Place three rows of concrete blocks around the perimeter of your pit or if you desire a permanent one, build a wall around using bricks.
Your fire pit is now ready for use. You just need to gather some woods and get the fire going!
Visit our website for premade and portable fire pit products reviews and more tips and techniques on outdoor cooking.
Fire Safety Practices:
1. Open fires are prohibited in some local codes that’s why it is necessary to check such restrictions before building a fire pit. Safety and building inspection is required in some areas.
2. Choose a spot away from trees, overhanging branches, tree roots in the ground, dry grasses, shrubs, or anything that can easily catch fire. If you don’t have a choice but to build in dry grasses, make sure that you build the fire pit walls higher.
3. Dried leaves, wood sticks, pine needles and other flammable debris should be cleared away for at least 10 feet around the fire pit. Use a mesh screen lid to prevent flying sparks from starting fire. Another option is to pre-water the surrounding area.
4. Bucket or bottle of water should always come in handy.
The Basics of Fire Pit Building :
1. The size of the pit is determined based on your intended use. If it is for keeping warm and creating light, a diameter of 2 feet is usually enough for one to three people and three to four feet for larger groups. If it is for cooking, it will depend on the food. The recommended 2-4 feet diameter is often sufficient for barbeques, direct grilling, and Dutch oven cooking. You might consider making two pits for indirect grilling especially whole stuff like for roasting whole pig.
2. Drive a stake in the ground at the pit center. You need to attach a string (1 foot) to the stake at one end and the other end to a large nail.
3. Make a circle for the pit with the nail and dig 1 foot deep. At the center of this large hole, make a smaller hole by digging 1 foot deeper with 6-8 inch diameter. This smaller hole is intended for drainage.
4. Both holes must be filled with gravel until the larger hole has gravels in it about 4 inches deep.
5. Add three inches of sand or soil that would now contain the fire.
6. Place three rows of concrete blocks around the perimeter of your pit or if you desire a permanent one, build a wall around using bricks.
Your fire pit is now ready for use. You just need to gather some woods and get the fire going!
Visit our website for premade and portable fire pit products reviews and more tips and techniques on outdoor cooking.
Read more: http://www.bukisa.com/articles/628517_tips-on-building-a-fire-pit#ixzz3kEwAph5G
Follow us: @bukisa on Twitter | bukisa on Facebook
No comments:
Post a Comment